Products that allow quick installation and remove of tubular proximity sensors by eliminating one or both of the sensor's mounting nuts. Quick mount products also maintain the original sensing gap during change out so sensing gap doesn't need to be recalibrated.
Block Mount DualClamp™
Rugged, 100% glass-filled Nylon, block mount with a two-stage DualClamp lever firmly secures sensors with finger tip easy. Available for 12 and 18mm diameter controls.
Zinc-Plated, Brass Quicktubes™
Collet-style locknut secures sensor. Integral stop shoulder maintains target gap. Available in 8, 12, 18, and 30mm sizes. Short or long barrel lengths.
MicroCollet™
These collet-type sleeves allow for more secure and damage free mounting of 4 and 6.5mm sensors. Simply drill and ream your fixture and then bond the MicroCollet in place. Secure and adjust sensors with the Delrin® adjustment nut. Eliminates tapping and damaging set screws.
Weld-On™
It is unfinished steel HEX slugs, bored and tapped for 12, 18, and 30mm sensors. Ready to be welded into place to fully protect sensors from physical abuse. Threaded end has a builtin stop shoulder that insures sensor position.
Sealed Face/Plastic Housing Quicktube™
A sealed face QT allows a water tight seal to be developed. Same dimensions as "long-style" QT's, accept for the wall thickness.
Plastic Housing Quicktube™
Identical dimensions to our regular Quicktubes", but with a Delrin® polymer housings for when metal won't work. Mounting nuts are metal.
QuickMount™
It is a plastic block mount with a hinged lever top, which snaps closed to secure tubular sensors. Adjust via slotted mounting holes or by opening and closing hinged lever. Glass-filled Nylon for 12, 18, and 30mm sensors.
1.gif)
