SMS-UK8 Universal Kits
SMS-UK8 Nylon 6-6 Bracket, Base and steel angled Rod for great positioning flexibility. Position & secure barrel style controls (5mm to 30mm dia.) or select user-machined option.

Base, Stamped
Stamped SMS-B-S Base Unit, for Half-Klamp Sets, attached to popular t-slot forming foundation for Sensor Mounting System

SMS-UK Universal Kits
The SMS-UK is a complete solution in a single part number. Customized to your requirements to mount many types of sensors, switches and cameras.

Spacer, Long or Short
The SMS-S-36 & SMS-S-76 are Spacers used to create offsets when using Base Units.

Rod, Angled
Use the SMS-RA type Rod as a sensor positioning element, or as an additional axis. Cold drawn 1/2" diameter, 304 stainless steel, with a minor length of 2" long; 2nd leg up to 18 inches.

Rod, Straight
Use the SMS-R type Rod to form a sensor adjustment rail, or to add an additional axis. Cold drawn 1/2" diameter, 304 stainless steel, in lengths up to 30 inches.

CrossCoupler™, Adjustable
The SMS-C-CR adjustable CrossCoupler™ holds (2) 1/2" diameter SMS Rods at 90 degrees, but allows rotation +/- 22 degrees.

CrossCoupler™, Fixed
The SMS-C-C CrossCoupler™ holds (2) 1/2" diameter SMS Rods at a fixed 90 degree angle.

CrossKlamp™ Coupler
The SMS-C-K & SMS-C-KH CrossKlamp™, often called a "Crossblock" meshes (2) 1/2' SMS Rods that can be fully rotated 360 degrees. Specify "Hex" or "Poly Handle" adjustment.

Coupler, Turned
The turned SMS-C Coupler allows the connection of two SMS-HK Half-Klamps™, which in turn meshes (2) 1/2' SMS Rods that can be fully rotated 360 degrees.

Half-Klamp™, with Handle
The SMS-HK-H is a dual-use device; clamps into Base Units allowing the connection of 1/2" or 12mm diameter rods that create the base axis of a Sensor Mounting System. Adjusts via tool-less poly handle.

Half-Klamps™, Hex Adjust
The SMS-HK is a dual-use device; clamps into Base Units allowing the connection of 1/2" or 12mm diameter rods that create the base axis of a Sensor Mounting System. Adjusts via hex wrench.

Base, Stamped Metal
Stamped SMS-B-R1 & SMS-B-R2 Base Units, for 1/2" or 12mm diameter rods. Attach to conveyor side rails to create foundation for Sensor Mounting System.

Base, Threaded
Threaded SMS-B-T Base Unit, for Half-Klamp Sets. Secured to your machine via a 3/8" SHCS forming foundation for Sensor Mounting System.

Base, Counter-bored
Counter-bored SMS-B-C Base Unit, for Half-Klamp Sets. Secured to your machine via a 3/8" SHCS forming foundation for Sensor Mounting System.

Coupler, Square
Square SMS-C-FC Coupler allows connection of two (2) 1/2 inch or (2) 10mm SMS Rods at a fixed 90 degree angle.

Coupler, Round Adjustable
Adjustable Coupler SMS-C-AC with knobs. Connect two (2) 1/2 inch or (2) 10mm SMS Rods at a fixed 90 degree angle, but allows quick hand adjustment.

Base, Cast Aluminum, Style 2
Cast aluminum alloy SMS-B-CB2 Base Units; for 1/2 inch or 10mm Rods. Offering two rod positions for flexible design options.

Base, Cast Aluminum, Style 1
Cast aluminum alloy SMS-B-CB1 Base Units; for 1/2 inch or 10mm Rods, with single rod position.

Base, Magnetic
ON/OFF switchable magnetic Bases, these SMS-B-M... models quickly connect sensors (via 1/2 inch or 10mm rods) to steel machine frames. For proof-of-concept, demonstration, or quick-change setups.

Base, HalfKlamp™ with Offset
Combine a HalfKlamp™, a SMS-B-C) Base, and Spacer for different offset heights. For 1/2 inch or 10mm SMS Rods.

Base, Pipe Strap Style
Allows sensors to connect to piping, the SMS-B-PS... Base unit creates a foundation for HalfKlamp™ units that then hold 1/2 inch or 10mm Rods, and Sensor Brackets.

Base, Strut Framing Style
Specify SMS-B-CBUS... Base units, then attach 1/2 inch or 10mm Rods & Sensor Brackets. Accepts a HalfKlamp™ and clip into 1-5/8" wide strut channel.