WeldJacket Pro™ S
Silicone tubing WJP-ST, sleeves WJP-SS and tape WJP-SW components allow sensors and cables repel weld splatter and deflect heat.

WeldJacket Pro™
WJP is woven fiberglass sleeveing, jacketed with a specially formulated silicone rubber. Diameters for Mini & Micro cables.

WeldJacket™
Non-fraying WJ is a woven fiberglass sleeveing that is coated with silicone. Diameters for Mini & Micro cables.

Housing Covers
Fabricated from solid Teflon® blocks, HC components press onto inductive block-style sensors and resist weld splatter, molten metal & paints.

Quicktube™ Caps
QTC are Teflon® caps for 8, 12, 18, & 30mm QT-xx-T Quicktube mounts.

Sensor Caps
SC and SN-xxN for M8, M12, M18, and M30 shielded & non-shielded inductive proximity sensors. Teflon®, Ceramic, Delrin® and Nylon®.

Housing Shields
Thread-on HS-T Housing Shields for M12, M18 & M30 inductive proximity sensors. Brass & copper alloys.

Ceramic Faces
A CF attaches to a sensor's face making it highly abrasive resistant. For 8, 12, 18, & 30mm sensor diameters and others.

EndNoze™ Caps
Beveled design of EN style caps, used with Cushioned Sensor Mounts , deflect side-traveling targets and abrasion. For 8, 12, 18, & 30mm diameter shielded & non-shielded proxes.

Housing Shields
HS Components offer sensors abrasion, and in some cases, solvent resistance. Numerous configurations, fabricated from plastic, ceramic & copper.

FiberJacket™
FJ adds protective layer to optical fibers. Field-installable in three styles, threaded and compression fittings, for 3, 4, & 6mm fibers.

Material Deflectors
Cone-shaped MD attach to sensor faces to deflect debris build-up, to eliminate false triggering. Fabricated from durable HDPE.